Eroding and grinding using one machine

WALTER's two-in-one machines can be used to process any PCD tool in any field, whether it be the wood, automotive or aerospace sectors or even special applications. As the use of complex and modern full-headed PCD tools is constantly increasing, so is the demand for combined processing, i.e. eroding and grinding using a single machine. This trend is already clearly evident when one considers the new kinds of PCD tools required, amongst other things, for CFRP processing in the aerospace sector. Combined processing is the only way to efficiently produce such PCD tools.

A further advantage can be derived from this in business terms: The fact that the user can perform both eroding and grinding or combinations of the two processing methods using one machine means that investing in such a two-in-one machine represents a risk-free introduction to the PCD field for companies that have not been able to or have not wanted to produce such tools until now. If it turns out that the PCD business does not develop as expected, the same machine can simply be used to completely grind the previous product range.

Ever since presenting it to the world at EMO 2001, WALTER has been continuously further developing this two-in-one concept and today offers a total of three machines based on it. Even back then the company knew that a powerful grinding spindle was essential for perfect production results and that many tools could be manufactured more efficiently with rotary eroding than with wire eroding. In 2006 WALTER introduced a software module that boosted the benefits of the two-in-one concept because it now also allowed electrode/grinding wheel changers to be automatically implemented.

2016 saw the introduction of "FINE PULSE TECHNOLOGY" for all two-in-one machines, setting new standards in terms of the surface quality, cutting edge roughness and process reliability of PCD tools. In particular, the generator was recognised as a central element with potential and has therefore been completely redesigned. Improvements in eroding software and a variety of other factors based on the machine design were also optimised as part of "FINE PULSE TECHNOLOGY". The difference to the other tools on the market can even be seen with the naked eye on the most common PCD types with 10 µm grain size. A tool produced with "FINE PULSE TECHNOLOGY" on a two-in-one machine from WALTER shines on its free surface, similar to a polished (ground) tool. Even coarse-grained PCD types, which previously could not be fine finished on the market, can be with eroded with the new "FINE PULSE TECHNOLOGY" and a perfect surface quality can be produced. In some cases even entire steps in the production chain can be omitted because the eroded tools no longer have to be re-sharpened or polished. Last but not least, the HELITRONIC TOOL STUDIO software solution was enhanced with the software licence "Eroding" in 2017, thus making tool shaping even easier and clearer, especially for PCD tools.