iConnectHub

Login/Register

WeChat

For more information, follow us on WeChat

Connect

For more information, contact us on WeChat

Email

You can contact us info@ringiertrade.com

Phone

Contact Us

86-21 6289-5533 x 269

Suggestions or Comments

86-20 2885 5256

Top

FCS brings injection molding solutions to Thailand

Source:Reed Tradex Release Date:2022-06-20 1351
ChemicalPlastics & RubberOthersCompoundingRaw Materials & CompoundsMaterials Handling, Measuring & TestingMolds & ComponentsPlastics Machinery
Add to Favorites
Fu Chun Shin Machinery Manufacture Co., Ltd. takes part at InterPlas Thailand where it showcases its range of advanced injection molding machines.

Fu Chun Shin Machinery Manufacture Co., Ltd. (FCS) was founded in 1974, and has become one of the leading manufacturers of plastic injection molding machines in Taiwan. In addition to the original business of injection molding machine R&D, manufacturing and sales, FCS also branches out into Magnet cable business, 3C electronics and materials technology industry. With the expansion of the group's business, in addition to Taiwan headquarters, FCS has successively established 4 injection machine production bases in Dongguan (1994), Jiangbei in Ningbo (2001), India (2019), and Ningbo Hangzhou Bay (2019).

 

At InterPlas Thailand, FCS is highlighting its advanced servo hydraulic injection molding machine under the FA Series with tonnage of  60~530 tons that features: linear guide for injection carriage to lower the wear and tear; servo injection closed-loop system for accurate control of the speed of each shot, with injection time stability of >99.9%; enhanced tie bar spacing and more flexible choices for mold application; with electric motor brake for stable adjusting of control and position; platen strength improvement that increase rigidity by 30%, lower deformation of mold plate.


FCS.png

 

The company also presents its FB-R Series, rotary table two-component injection molding machine and rotary table two-component injection molding machines with tonnage of 160~1900 tons. FCS has 38 years of production experience in two-component injection molding machines and the FB-R Series is a reflection of  such expertise with its designs of rotary table, rotary shaft, sandwich/interval; rotary table controlled by servo motor that could shorten rotary time by more than 50%, with more stable rotary speed switch; with accurate rotary positioning clamper to protect the mold;  with the product insertion function, three-component and four-component products that can also be molded to expand the scope of use.

 

Other exhibits include the all-electric injection molding machine under the CT-e Series suitable for medical products and the LM Series that is based on the design of major companies in Europe and has a tonnage of 500~4000 tons. FCS also highlights its IMF 4.0 Intelligent Manufactory (iMF 4.0) Smart Manufacturing solutions that apply additional sensors to monitor and meet the slight fluctuations caused by the environment, material, or machine abrasion, and to improve the adaptive control of injection molding machines. The Smart Management system uses intelligent managing system to collect the key data of viscosity variation of melt.  

 

 

FU CHUN SHIN MACHINERY MANUFACTURE CO., LTD.

Booth no.: 3E31, Hall: 103

Website: https://www.fcs.com.tw/tw/index.html


Add to Favorites
You May Like